Certificate and Patent
The FCC Declaration of Conformity or the FCC label or the FCC mark is a certification mark employed on electronic products manufactured or sold in the United States which certifies that the electromagnetic interference from the device is under limits approved by the Federal Communications Commission.
The FCC label is found even on products sold outside the US territory, because they are either products manufactured in the US and had been exported, or they are also sold in the US. This makes the FCC label recognizable worldwide even to people to whom the name of the agency Federal Communications Commission is not familiar.
RCM (Regulatory Compliance Mark) is a registered mark that indicates that the supplier declares that the product complies with the safety and other requirements stipulated in the electrical safety laws/regulations of Australian states and New Zealand, and also complies with the Australian Radio Communications Act and the New Zealand Radio Communications Act "Electromagnetic compatibility requirements specified in Only products that meet the requirements of both electrical safety regulations and EMC regulations can use the RCM mark.
CE Marking is the symbol as shown on the top of this page. The letters "CE" are the abbreviation of French phrase "Conformité Européene" which literally means "European Conformity. "CE Marking" is now used in all EU official documents.
CE Marking on a product is a manufacturer's declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislations.
The definition and aim of the RoHS directive is quite simple. The RoHS directive aims to restrict certain dangerous substances commonly used in electronic and electronic equipment. Any RoHS compliant component is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.
The C-Tick is an identification trademark registered to the Australian Communications Media Authority (ACMA). The C-Tick mark signifies that the labeled electronic device is compliant with applicable electromagnetic compatibility (EMC) requirements. The C-Tick mark also provides a traceable link between the equipment and the supplier and is a pre-requisite of the Australian Government to legally sell the product in Australia.
The GOST-R mark is a mandatory certification mark for all electrical products to be shipped into Russia. The laws of the Russian Federation prescribe conformity of products to the Russian safety standards (GOST-R). A product without the GOST-R-conformity mark may be rejected at the borders of the Russian Federation.
The GOST-R certificate is issued following technical evaluation of your company's products to ensure compliance to Russian safety regulations. The GOST-R Certificate is valid for three years and a license to use the GOST-R mark is valid for one year and renewed with an annual factory inspection.
The National Intellectual Property Administration, also known as the Chinese Patent Office, is the patent office of the People's Republic of China.
it was founded in 1980, as the Patent Office of the People's Republic of China, before changing its name to "State Intellectual Property Office" (SIPO), and then to "National Intellectual Property Administration”. It is responsible "for patent work and comprehensively coordination of the foreign related affairs in the field of intellectual property.